Point-of-Sale Software Downloads

Below are the available software downloads from Honeywell Video Systems. You will need the Winzip Software to view most of these downloads.

SmartPIT Software Upgrade Procedure (pdf)
01/09/08

Application Note: SmartPIT Software Release Summary (pdf) 
01/15/10

Data Analytics - Interfaces Supported (pdf)
05/05/09

SmartDataFilters
We continue to add more customized SmartDataFilters for ECR or POS stations for the SmartPIT.
The following file contains all currently available SmartDataFilters
SmartPit SmartDataFilters (tar)
01/18/10

Note: In the event that the SmartDataFilter file is deleted from the SmartPIT download the above file to install on the SmartPIT

SmartPit Demo Package
SmartPIT POS Demonstration Package (zip)
05/06/08
SmartPIT ATM Demonstration Package (zip)
05/06/08
These packages contain application notes instructing how to configure a SmartPIT to send simulated text data to a Rapid Eye or HRXD/HRSD DVR. Also contained are files needed to Install on the SmartPIT to perform the simulation. Once this is performed the SmartPIT will send text data to the Rapid Eye or HRXD/HRSD every 30 seconds

IDM Software
IMPORTANT: If you have IDM software installed and licensed to access, you must contact Honeywell Video Technical Support before the installation of IDM 8.1.7.  Technical support has to verify your existing IDM installation using your current valid license key; prior to issuing a new license key.  Your current registration code will not work with IDM 8.1.7.

IDM 8.1.7 Software (.zip, 218.17 MB )
      05/07/2009

IDM Reference Guide (pdf) 

Data Capture Programs
SmartPIT can be set to capture mode and be used to capture POS data in a capture file. SmartPIT can then playback this captured data and a SmartDataFilter can be created by the installer on site or this file can then be forwarded to Honeywell in order to create a SmartDataFilter file for the POS device.

In the event there is no SmartPIT at the site you can use the following utilities to capture serial transaction data. The data is captured in a file that can be loaded into a SmartPIT. You can load onto a SmartPIT back at the office or forward this data to Honeywell technical support .Once loaded into a SmarrtPIT this data can be played back and a filter file can be potentially created for the POS device.

	Winsaver Lite - a serial data collection utility for Windows (.zip, 1.97 MB)
	Saver - a serial data collection utility for DOS (.zip, 80.91 KB)

For IDM License Requests please contact Honeywell customer service at 1.800.796.CCTV or email videolicenserequests@honeywell.com.